Friday, September 18, 2009

Painting

Again, I have a few days of progress to report... After our successful launch, I had to get around to actually finishing everything. I started with a long session with the random orbital sander, smoothing down all the rough spots from the first fairing coat. After that got smoothed out pretty good, I put on a much thinner second coat, limited to the area around the fiberglass joints. After this was set, I ran over everything again with the sander getting the hull and deck nice and smooth. There are still a couple rough spots here and there, but you have to be pretty close to see them. Then finally, I put on the first coat of paint. I started with Rustoleum Wood and Fiberglass Primer, which went on without a hitch. I used a foam roller (cut in half to ~4") for the majority of the hull, and a small brush for the coaming. Last night, I put on the first coat of Rustoleum Topside Paint after giving the primer a quick, light sanding. The boat looks great, I'll try and get a couple new pics up soon.

No comments:

Post a Comment